How to restore old doors with your own hands

Old doors that do not close well, covered with several layers of paint, which left old drops and streaks in some places, irritating with their primitive and inconvenient handles and latches, cause a natural desire to change them for new ones. But let's not rush. If you approach the matter properly, they can become better than modern ones, surpassing even many modern models in some indicators.Why is it not better to change all the old doors, and it is preferable to restore them?Firstly: not all new doors are better than old ones in quality. Even if the door is not completely wooden, but only has a wooden frame covered with fiberboard (fiberboard), it is superior in quality to a door made entirely of MDF (pressed paper), second only to the latter in external design.Secondly: we are winning in money, because the cost of paint, putty and work is still much lower than buying new doors.Third: we get rid of the need to break out the old door box and repair the slopes.Fourth: we can choose the color of the paint, or the color of the varnish exactly what we need, and not choose from a limited number of options available in the store.Fifth: the old doors have already settled down, dried out completely over the years, and we will have no problems with the subsequent shrinkage of the material and fitting.So - let's get started. We need to:1. Remove the door from the hinges 2. Remove the hardware from the door - handles, hinges, locks.3. If this is an interior door with glass, you need to pull out the old beads, pick them up with a screwdriver, then with pliers or pliers pull out the carnations securing the bead. After that, carefully pull out the glass.4. Remove the old paint. A blowtorch or, more conveniently, a construction electric hair dryer will greatly help us in this. Heat a small area of paint until bubbles appear and remove it with a spatula or scraper.5. When the paint is removed, the door needs to be sanded with a sander. If there is no sander, you can use a rectangular wooden bar, wrapping it with sandpaper.6. With a spatula, apply a layer of wood putty to the canvas to level the surface.7. When the putty dries, you need to carefully align the door leaf with sandpaper, after which you can apply a layer of primer.8. Clean the primer with fine sandpaper, finally leveling all minor irregularities.9. Paint the door using a roller in large areas, and a brush in the corners. Prepare and paint the door box in the same way. In the most damaged places, instead of putty on wood, you can use a car, consisting of two components (filler and hardener). This putty dries faster and holds on more firmly, although it is more expensive than wooden.10. Fasten new hinges, handles, latches or locks and hang the doors in place.The main thing is to do everything carefully and accurately. Of course, it will take some time, but the result of the work will be pleasing for a long time. Especially if the work is done with your own hands. Great promotions, high odds and great games from the club best sports betting sites Philippines